phone(925) 447-7500
NEMA 4 Rated Outdoor Enclosure (ODE) Series
Wallmount Enclosures

Request for Quotation (RFQ)

NEMA 4 Rated Outdoor Enclosure (ODE) Series Wallmount Enclosure

Category:

Overview

ARIA NEMA 4 Rated Outdoor Enclosure (ODE) Series Wallmount Enclosures are designed for environments where durability, security, and weather resistance are required.

The ODE is available in a standard and XL format.

The ODE can be supplied with a microduct manifold, pre-terminated drop cable, or ODVA adapters.  The ODE XL supports patching and splicing, a splitter module (up to 1×32), and angled adapter ports for easy access.

NEMA 4 Rated

Rated for either indoor or outdoor use and provides protection to personnel against incidental contact with the enclosed equipment and protects from falling dirt, rain, sleet, snow, windblown dust, splashing water, hose-directed water and the external formation of ice.

Features

  • Lightweight, weatherproof, and flexible enclosure provides connectivity in almost any environment.
  • The bottom of the ODE features knockouts that support compression fittings or adapters for ODVA Style IP67 Rated Cable Assemblies.
  • There is a knockout on the rear of the ODE that accepts an optional weatherproof gasket for securely transitioning cable to the inside of a pole.
  • The outer pad-lockable door and wallmount brackets can be supplied with Torx Security fasteners for enhanced security.
  • Pole mount brackets are available for both the ODE and ODE XL.
  • Microduct manifold support provides the ability to accept air blown or pushable fiber.
  • Cable tie down locations and fiber management rings provide an organized and secure path for fiber.
  • Angled adapters on the ODE XL provide enhanced port access for easy inspection, testing, and cleaning.
  • The ODE XL can be configured for patching and splicing or as a splice only panel.

ODE

Specifications

Dimensions (Inches)
15.3 x 9.5 x 4.3 (HxWxD)
Adapter Plate Capacity
2
Fiber Capacity
24 SC or 48 LC
Bottom Knockouts
(6) 1.1” and (1) 1.5”
Rear Knockouts
(1) 2.0” Knockout
Material
2.0mm Thick Aluminum
Material Finish
Gray Powdercoat
Weight (Empty) (lbs)
5.0
Additional Features
Knockout on rear for cable entry via pole

ODE Bottom Cable Entry

ODE Rear Cable Entry

ODE Microduct Manifold Support

Knockout Removed and Gasket for Rear Cable Entry Installed

ODE XL

Specifications

Dimensions (Inches)
15.3 x 9.5 x 6.8 (HxWxD)
Adapter Plate Capacity
2
Patch & Splice Capacity
24 SC or 48 LC
Splice Only Capacity
12 Splice Trays for 288F Single or 864F Ribbon
Bottom Knockouts
(2) 1.1”, (3) 1.5” & (1) 2.0
Material
2.0mm Thick Aluminum
Material Finish
Gray Powdercoat
Weight (Empty) (lbs)
6.0
Additional Features
Splitter, splice only or patch and splice configurations
supported. Angled adapters for easy port inspection.

ODE XL Bottom Cable Entry

ODE XL Bottom Cable Entry

ODE XL Patch & Splice

ODE XL Splice Only

ODE XL with 1x32 Splitter

Compatible with ODVA IP67 Rated Cable Assemblies

The bottom side of the enclosure features knockouts that are compatible with ODVA Style IP67 Rated Cable Assemblies

Accessories

Medium Compression Fitting Supports Cable O.D.: 0.25”-0.49”
P/N: CF-MD
Three Slot Flat Drop Compression Fitting with Removable Spacers
P/N: CF-3S-FD
Large Compression Fitting Supports Cable O.D.: 0.59”-0.99”
P/N: CF-LG

*Not Compatible with Pole Mount Brackets

Gasket for Rear Cable Entry using a 10” Pole*
P/N: ODE-REAR-GASKET
Side Cable Attachment Bracket
P/N: ODE-SCAB
Torx Security Bit
P/N: TS-M6-B
Torx Security Driver with Bit
P/N: TS-M6-D
Tap for Direct Pole Mounting
P/N: M6-1-TAP
Pole Mount Brackets
P/N: PMB-KIT
15” Diameter Pole Mount Straps
P/N: PMB-STRAPS
25 x 5.0mm Cable Compression Fitting for ODE XL
P/N: CF-25-5
Microduct Manifold Supports 10 mm OD Microduct
P/N: MDM-12X-10
Microduct Manifold Supports 8.5 mm OD Microduct
P/N: MDM-12X-8.5
Compression Fitting Strain Relief Bracket
P/N: CMPFITSR-BRACKET
24 Fiber Single Fiber Fusion Splice Tray (4”x8”)
P/N: 4824CWMP
6 Position Ribbon Fiber Mass Fusion Splice Tray (4”x8”)
P/N: 4872RCWM)

Part Number

All singlemode fiber optic cable assemblies provided by ARIA Technologies, Inc. are tested to: Telcordia GR-326 Issue 4 Specifications