phone(925) 447-7500
ASC-RDR Series
Rackmount Enclosures

Request for Quotation (RFQ)

ASC-RDR Series Rackmount Enclosure

Category:
ARIA ASC-RDR Series Rackmount Panels are modified versions of the standard RDR series that have been optimized for use with the ARIA Splice Cassette (ASC).

Available in 1RU and 2RU sizes, the ASC-RDR series panels accommodate up to 72 fibers LC or 36 fibers SC per rack unit.

Both panels are compatible with 19” and 23” racks, and feature removable lids and doors, as well as a sliding cassette tray for easy cassette installation.

Features

  • Doors feature slide latches that support quick panel entry

  • Cut top lid provides enhanced connector visibility and access

  • Rackmount brackets feature cutouts that ease installation by allowing the panel to be lowered onto rack screws

  • Cable jackets and strength members can be secured at the back of the chassis or at the strain relief bracket

  • Panel can be mounted at 4 different depths for 19” racks and 3 different depths for 23” racks

  • Grounding support is provided on both the left and right side of the panel

  • Removable lids provide superior component access

1RU ASC-RDR

Part Number: ASC-RDR-1RU

Specifications

Rack Units
1
Dimensions (Inches)
1.75 x 17.0 x 14.0 (HxWxD)
Cassette Capacity
3 ASCs
Fiber Capacity
36 (SC) or 72 (LC)
Mounting
19” or 23” Frames
Material
1.5mm Thick Steel and Aluminum
Material Finish
Dark & Light Gray Powdercoat
Weight (Empty) (lbs)
9.5

2RU ASC-RDR

Part Number: ASC-RDR-2RU

Specifications

Rack Units
2
Dimensions (Inches)
3.5 x 17.0 x 14.0 (HxWxD)
Cassette Capacity
6 ASCs
Fiber Capacity
72 (SC) or 144 (LC)
Mounting
19” or 23” Frames
Material
1.5mm Thick Steel and Aluminum
Material Finish
Dark & Light Gray Powdercoat
Weight (Empty) (lbs)
10.5

Jumper Management

Cutouts below the adapters support easy connector removal and tie down locations on the front of the tray provide jumper management.

Jumper Bend Radius

4.0” of space between the adapter plate and door provides ample room for proper patchcord bend radius even with an attenuator connected.

Cable Strain Relief

Top or bottom cable entry is supported. Attach the strain relief bracket in the desired orientation and secure the cable jacket.

Latching, Sliding, and Removable Tray System

A spring latch at the front of the sliding tray when lifted permits the tray to slide forward or backward.
The sliding tray locks in the forward position and provides access to the splice cassettes and connectors for splicing, cleaning, and testing. A spring latch at the rear of the tray when lifted allows the sliding tray to be removed.
The tray can be removed and brought to a comfortable level on a table or workstation for easy access to the splice cassettes and connectors.

Accessories

Flush Mount Brackets for 1RU
P/N: 1RU14D-FMBKIT
Strain Relief Bracket
P/N: STD-SRB-KIT
Extended Strain Relief Bracket
P/N: EX-SRB-KIT
Magnetic ID Chart Pouch for 1RU
P/N: MAG-ID-CHART-POUCH-1RU
Magnetic ID Chart Pouch for 2RU
P/N: MAG-ID-CHART-POUCH-2RU
All singlemode fiber optic cable assemblies provided by ARIA Technologies, Inc. are tested to: Telcordia GR-326 Issue 4 Specifications